Fire emergency lighting has penetrated into every aspect of our lives, and its value far exceeds the product itself. Fire emergency lighting is a type of fire emergency lighting that provides illumination for personnel evacuation and firefighting operations, and is used to respond to sudden and unexpected power outages. Later on, it also provided lighting for personnel evacuation or firefighting operations, so emergency lighting fixtures for firefighting have brought great convenience to our daily lives. However, there are always counterfeit and inferior products in the market, so how should we distinguish between authenticity when purchasing and using lighting fixtures?
Qualified fire emergency lighting and evacuation indicator lights are made of non combustible materials, and each emergency light has a battery and voltage regulator. Once a fire occurs, the emergency lights will automatically start guiding the crowd in the dark to the escape route. Fake emergency lights usually use plastic materials. Lighters can ignite within 10 seconds and cannot automatically open after a power outage. It needs to be manually pressed to start, so it doesn't work at all. The following are the differences between emergency lights and counterfeit emergency lights.
1. Check the qualification information: Before purchasing, check the type certificate and inspection report of the product. Fire emergency lighting and evacuation indicator lights are type approved products. The seller needs to provide corresponding type approval certificates and inspection reports, and be able to find information on fire protection products in China online, and attach new ID cards to the products. And our left-hand lighting products all have these advantages.
2. All internal and external markings need to be consistent: Qualified products need to have fire product ID card markings, charging signal lights, experimental switch buttons, certification certificates, manufacturing dates, manufacturer names, and related technical parameters on the lamp body. The content of the above non-conforming products is vague or incomplete. The batteries of fire emergency lights and evacuation indicator lights are also the main components that some manufacturers pass off as good or counterfeit. The batteries used in the lighting fixtures should be clearly labeled with the model, voltage, capacity, etc., and should be consistent with the product inspection report. If there is no such content or the inspection report does not meet the requirements, it is considered an unqualified fire protection product.
3. Simple experiment: After a power outage, the fire emergency lights and evacuation indicator lights should be immediately placed in an emergency state, and the continuous lighting time should not be less than 90 minutes. Consumers should do their best to purchase one before conducting the discharge test. If the emergency time is less than 90 minutes, it is considered an unqualified fire protection product.
The above are three methods for distinguishing the authenticity of fire emergency lighting, hoping to be helpful to everyone.
